N386CC - 2002 CUBCRAFTERS PA 18

2002

CUBCRAFTERS

PA-18

9945CC

N386CC

Used

VFR

A CubCrafters PA-18 with just about all of the options from the Factory! Serial 9945CC is not a rebuild. 2100A WipLine Amphibious Floats, conventional Landing Gear (currently on floats). Deluxe IFR "Equipped" Radio Package (Not IFR Certified). 180HP O-360 with light weight starter were among many of the options installed on this aircraft. A pleasure to fly. 2002 Piper / Cub Crafters PA-18 AMPHIB 180hp

496.0

Damage History: None Log book history: All log books accounted for. Weights: Gross Weight - 2000 lbs. Useful Load w/o Floats - 801.0 lbs. Useful Load w/ Floats: 468.7 lbs.

496

SNEW

Lycoming O-360-C4P S/N: L38718-36A 180hp 2000hr TBO Engine TT: 496.0 Engine TSN: 496.0 Engine Install Date: 7/29/02

McCauley Fixed Pitch 1A200/FA8241 S/N: ZD46010 Prop TSN: 185.0 Date prop installed: 12/8/05

Garmin GNS 430 Nav / Comm Garmin GTX 327 Transponder W/ Mode-C ACK A-30 Altitude Encoder ACK E-01 ELT PS Engineering PM1000II 2-Place Intercom Electronic International EGT, CHT, Oil Temp / Pressure, Volt / Amp Gauges

Optional Equipment Installed: 180 HP Lycoming Engine 46 Gallon Wing Tanks Vortex Generators Sealed Wing Struts (eliminates repetitive AD) Side access baggage door 2000-lb Gross weight increase Atlee Dodge Muffler Shroud Stainless Steel Control Cables Landing Gear: HP Brake Master Cylinders Lighted / Aural Warning gear position switch Standard Conventional Landing Gear (currently on floats) Wipline Amphibian Floats- Model 2100A P/N: 34A07509-008 S/N: 21297 & 21298

2002

Paint (1-10 rating) – 9 New at Factory – 7/2002 PPG Delta “DSHS 80502 Yellow” with Traditional Black accents Glass (1-10 rating) – 9 New at Factory - 7/2002

2002

2

(1-10 rating) – 8 New at Factory - 7/2002 Leather / embroidered CubCrafters seats Hinged rear seat bar 3” window vent Rear under seat storage Extended 180-lb. capacity Aft Baggage w/ side access door.

Annual performed 9/11/08 Professional Air Bend, OR 100 hour inspection @ 463.0 Professional Air Bend, OR 25 hour WipLine Float inspection @ 494.0 Professional Air Bend, OR ELT Inspection 9/11/08 Professional Air Bend, OR Transponder / Altimeter / Static System Cert performed 8/2/07 Leading Edge Avn. Bend, OR AD Compliance: Paper Air Filter Replacement Next Due in 377.0 hours Magneto Inspection Next Due in 377.0 hours Exhaust Muffler Inspection Next Due in 74.0 hours All systems functioning and specifications listed above are subject to verification by purchaser’s inspection.

H6MA663L