N66091 - 1983 CESSNA 172Q CUTLASS

1983

CESSNA

172Q CUTLASS

17275964

N66091

Used

IFR

Professional appraisal placed value at $63,250. A copy can be supplied upon request. N66091 has lived in the dry climates of Colorado and Arizona since new; the 172Q is the most unique and desirable of the pre 2007 172's and it is the basis for the 172R and 172S models. Complete logs since new.

5993.0

NDH Top skins on flight control surfaces, stab and outboard wing panes replaced and repainted by Beagle Aircraft, Greeley CO, 2005 due to minor hail damage. Windshield and fabric below windscreen replaced. Wings have paint abrasion protection on leading edges.

1564

SFOH

LYCOMING A4M. 180hp installed in Cessna factory. Cessna produced only 295 172Q 180hp models during 1983 and 1984. Only 16 are currently registered in the USA. So this is a very rare aircraft and the only one currently on the market. You could consider it a prototype for the current 172S. Why settle for a STC conversion?

McCauley, 76 inch dia, Hub Design 1A17OE, Blade Design JFA7658 Cessna installation on Cutlass II.

ARC 300A Audio Panel ARC RT385A Nav/Com (dual) ARC Glide Slope ARC 300 ADF ARC 300 Transponder with encoder King KN64 DME

Steps and Handles Long Range Fuel Wheel Fairings (installed) Low Vacuum Warning Outside Air Thermometer Tinted Glass (windshield new 2005) Articulating Seats Opening Windows Digital Chronometer Hobbs Meter PTT Switches (both Yokes)

2005

Attractive white/blue/orange scheme Aircraft top and sides repainted in 2005 Paint well above average

1983

4

Very good and serviceable condition. Top of rear seat needs repair due to fraying from reaching into baggage compartment.

FRESH ANNUAL JULY 2016 TRANSPONDER CALIB JULY 2016