N8638J - 1986 JOHNNY MORRIS COYOTE 180

1986

JOHNNY MORRIS

COYOTE 180

N8638J

1986-2

VFR

Used

1986.7

2

Wingspan: 40ft. 2in. Wing area: 198.2 sq.ft. Ailerons 17" x 119" Flaps 17" x 89" Wing design: Leading edge cuff, large flaps and ailerons, droop tips,strut extensions. Ailerons droop (lower down) with flaps for STOL effect. Length: 21 ft. 8in. Empty WT: 1210 lbs. Scott 3200 tailwheel Fuel grade/capacity: 100 octane 40 US gal. (12 gal. nose tank. Two 14 gal. wing tanks 850 x 6 wheels and tires. Cleveland hydraulic brakes. Over--sized baggage compartment and sky light Gross WT: 1900 lbs. 12 volt electrical system Large vertical stabilizer and rudder. Highly modified STOL fabric taildragger---land or float plane.

1939 Taylorcraft fuselage (front section. Completely re-inforced this section. Complete tail section Johnny Morris design made from 4130 tubing.

568

SMOH

Lycoming 0-360 C2A. 0-540 cyllinders. 180 HP-normal aspirating

1A-200 McCauley 82-37 Round-tip prop with 400 hrs. since overhaul

All modifications (too many to list here) are recorded and explained in aircraft log books. Call for explanation.

No radios

Pully brackets and fittings for floats.

Fuselage and wings are covered with Stitts H590X fabric. Poly-brush/Poly-spray Poly-tone color All metal parts are primed with epoxy primer. Color---Red, White, and Blue Randacryl paint

1986

Seats black noggahide. Interior red noggahide. Blue instrument panel. Control yokes, flap lever, and jocky box compartments are hand-carved cedar with walnut inlay.

1986