2023 WAUSAU MP

2023

WAUSAU

MP

New

WAUSAU MP–LOADER MOUNTED AIRPORT SNOW BLOWER The SNOGO® two stage auger, full hydro-mechanical type blower heads are of very compact design, suitable for all snow conditions, and ideal for spot-casting/loading of snow through a discharge or telescopic loading chute. The MP’s three 14” horizontal serrated augers feed into a 38.5” impeller. POWER PACKAGE Blower engine – Cummins 300 HP Tier IV Final Engine, providing output up to 1800-2000 tons per hour. Power is applied hydrostatically from the engine to the blower head eliminating the need for shear pins, clutch and angle drives. Reliability and durability of the impeller and augers is assured by hydraulic reliefs in the drive system. Sized for 3 to 3.5 cubic yard loaders. FEATURES • Bolt-on coupler system for various loader quick hitches • Drive chain for augers running in oil bath • Engine enclosure with gas spring assisted tilting rear and side door • Turntable rotates 300 degrees • Standard serrated augers • Self-adjusting drive chain – for proper tension • Compact control box & optional wireless controls COMPONENTS AUGERS • Three (3) 14-inch diameter – full flight, Serrated • All augers mounted on self-aligning bearings • Auger speed: 450 RPM AUGER DRIVE • Hydraulic relief protection (5500 psi) • #100 HD chain (1.25” pitch), • Auger drive chain enclosed in oil bath • Self-adjusting chain tensioner IMPELLER AND FAN HOUSING • Heavy-duty steel impeller weldment – 38.5-inch • Six (6) alloy steel, 1/4” thick T-1 material • Heavy steel fan housing – 1/4-inch, T-1 steel ROTARY HOUSING • Constructed from hot rolled steel plate and structural tubing • Rear frame adaptable for bolt-on coupler system • Wear plates and wear shoes made from alloy steel & cast iron • Two (2) end wear shoes, 86 sq.-in. (both fronts), spacer plate adjustable • Two (2) center mushroom shoes, 168 sq.-in. (both), screw adjustable • Two (2) rear mushroom shoes, 168 sq.-in. (both), screw adjustable • 422 square inches of wear surface (avg. over wear life) • Snow deflector over top auger • Drift cutter knives, Leader edges ENGINE: (‘TIER 4 FINAL’ EMISSIONS STANDARDS (CARB & EPA)) • Cummins Model: QSL-9, 300 HP @ 2200 RPM (224 kW) In line 6 cylinder • Cubic Inch Displacement: 543 cu. in./ rev. (8.9 L) • Max. Torque: 1050 lb. ft. @ 1500 RPM. ELECTRICAL SYSTEM • 12-volt starting • Negative ground • Two (2) 12-volt 950 CCA • 100 AMP alternator (12 V) HYDRAULIC SYSTEM • 20-gallon hydraulic reservoir • Tandem Hyd. closed loop pumps, Hyd. motor • planetary for auger and fan drive. • 8 GPM, gear type hydraulic pump – engine driven • 4-bank valve for chute and volute functions FUEL SYSTEM • 65 gallon fuel tank (steel) INSTRUMENTATION • LCD display, for engine coolant temperature, oil pressure, system voltage, engine hours, engine fault codes, fuel level, and DEF level. THREE SECTION LOADING CHUTE FIRST SECTION: • 3/16 hot rolled steel plate, welded construction • 14-5/8-inches inside width SECOND SECTION: • 12 Ga. auger hot rolled steel sheet, welded construction • 15-3/4-inches inside width THIRD SECTION: • 12 gauge hot rolled steel sheet, welded construction • 17-inches inside width HYDRAULIC CONTROLS • Chute Rotator, Steel Gear Driven • Allows rotation in horizontal arc of 300 degrees; 150 degrees to either side of straight forward. OPTIONS • Wireless Radio Remote Controls • Headlights • Snow Wheels • Carbide Shoes • Poly Housing and Chute liners Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.