2023 SNOGO MP318

2023

SNOGO

MP318

New

WAUSAU MP-318–LOADER MOUNTED AIRPORT SNOW BLOWER BLOWER HEAD The SNOGO® two stage, full mechanical auger type blower heads are of very compact design, suitable for all snow conditions, and ideal for spot-casting/loading of snow through a discharge or telescopic loading chute. • The MP-318’s three 18” horizontal augers feed into a 41” impeller. • Cutting widths are 102”, 110”, and 120”. • Blower height is 60”. • Separate shear pin protection for both augers and impeller. POWER PACKAGE Blower engine options range from 300 hp to 425 hp, providing outputs up to 2,500 tons per hour. Power is transferred from the engine to the blower head by means of gear/chain drives. All drive train components are engineered with ample built-in safety margins to assure reliability and longevity. Sized for 4 cubic yard loaders (minimum). FEATURES • Capacity of 2500 tons per hour minimum • Two-stage design, triple augers feeding an impeller • Three, 18-inch horizontal augers, 60-inch cutting height • 41-inch impeller with replaceable blades • Minimum 300 horsepower diesel engine • Telescopic chute for truck loading or spot casting snow • Rotating impeller housing for free casting snow • Cutting width of 110 inches available • Shear pin protected augers and impeller • Operating weight approximately 10,500 lbs. • Sized for 4 cubic yard loaders Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.