2025 M B COMPANIES 4600CRDL

2025

M-B COMPANIES

4600CRDL

New

M-B COMPANIES 4600 CRDL — Runway Clearing Tow Behind Cradle Broom The 4600-CRDL Cradling Broom is designed for stowing and cradling in-line for transport and storage. The casters lift off the ground when cradled to eliminate damage during transport and to extend caster life • Equipped with a 26,000 pound steering axle with ABS as standard. • The automatic steering system includes automatic drift control and has provisions for centering and disengaging the axle steering system. • 46 inch diameter broom is available in lengths of 16, 18, 20, and 22 feet, providing swept paths up to 18 feet wide. • The broom head can turn up to 600 RPMs with 4024 ft-lbs of available torque at the broom shaft with 5075 psi maximum working pressure. CRADLING TOWED AIRPORT BROOM The 4600-CRDL Cradling Broom is designed with storage and transport in mind. The unique and functional design promotes safety, productivity and longevity while saving you storage space and time. FEATURES & BENEFITS • Stowing broom head design for easy transport and storage • Casters raise when cradled to eliminate damage during transport and extend caster life • Steering system with automatic drift control • Towing chassis determines turning radius to ensure the broom consistently follows the chassis • Center rotating bearing ensures the weight and location of the broom head remains on the carrier center line regardless of the position of the broom head • Broom head tilt independent of chassis to compensate for surface variations and minimize brush pattern deviation during operation • Gearboxes with keyed tapered hubs to prevent loose connections • Hardened steel pilot plates and core sprockets to accommodate radial loads • Molded urethane drive cogs for torque transmission • Independent auxiliary electric motor with hydraulic pump to support hydraulics and jack stand • Operator controls in cab and engine enclosure to promote operator safety and operations • Battery disconnect switch to remove power to unit • Broom speed tachometer EQUIPMENT OPTIONS Broom Head Configuration Options: • 20 ft broom length • 22 ft broom length Broom Power Package Options: • 496 HP, electronic turbocharged diesel engine, T4F, EPA / Stage 5 emission certified, 500 rpm broom with 4,828 ft-lbs of available torque at the broom shaft at 5,075 psi, or optional 600 rpm broom with 4,024 ft-lbs of available torque. Engine Options: • Broom engine oil pan heater, pad type • Broom engine block heater, immersion type • Battery trickle charger, 1.5 amp • Battery charger, 20 amp • Battery heater, pad type • Remote jump start battery lugs • Hydraulic oil tank heater, pad type • Fuel heater, pad tank type • Coolant filter Broom General Options: • Automatic brush pattern adjustment • Broom head vibrator • Ground speed control (Required: automatic brush pattern adjustment and broom speed tachometer) • Broom hydrostatic pressure gauge • Auto stripper bar adjustment system (Required: automatic brush pattern adjustment) • Snow shed hood • Rear view color camera system • 13 lbs of poly/wire alternating wafers in place of all poly wafers Broom Spare Parts Options: • Broom chassis axle tire and wheel • Set of broom cores • Set of four broom carts, non-adjustable • Set of two end plate jacks for core change • Caster tire and wheel, nitrogen filled • Caster tire, wheel, hub, bearings, axle, nuts, nitrogen filled • Caster tire and wheel, foam filled • Caster tire, wheel, hub, bearings, axle, nuts, foam filled • All poly, all wire or poly/wire alternating wafer kits CRDL, Chassis Integration of towing Chassis Option: • Stationary fifth wheel and mounting, 9,000 lb ballast, plow controls and rear axle protector Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.