N717CD - 2018 AIRBUS H125

2018

AIRBUS

H125

8505

N717CD

Used

Mid-time, US-registered 2018 H125 with dual hydraulics. The 3,000-hour dynamic component event was completed in April 2025, so the MGB, TGB and servos each have 2,712 hours remaining to overhaul, and the Starflex is new. The 150 hr/12 month inspection was completed 07/2026, and the 12-year airframe inspection isn't due until 06/2030. Times: 3,287.8 hours TTAF and engine; 7,963 landings. Engine: Arriel 2D, 1,712.2 hours remaining to TBO, N1 cycles at 52%. Avionics: Garmin G500H EFIS, Garmin GTN, Garmin GTX-345R with ADS-B In/Out, Garmin GRA5500 radar altimeter, Aero Computers UC-6000 17-inch moving map, and NAT audio system. Mission equipment: NVG STC, Onboard Systems 1,400 kg swing cargo hook, cargo mirrors left and right, and dual controls. Airframe: Donaldson inlet barrier filter, IFS air conditioning and cabin heat, wire-strike protection, Dart carbide skid shoes and boarding steps, Kannad 406 ELT, and 4-place aft cabin. Full buyer information package, spec sheet and maintenance records available on request. All specifications, times and equipment are subject to buyer verification through records review and pre-purchase inspection.

3287.8

7,963 landings. The 3,000-hour dynamic component event was completed in April 2025; the MGB, TGB and servos each have 2,712 hours remaining to overhaul, and the Starflex is new. The 150-hour/12-month inspection was completed in July 2026.

2712

2712

3287.8

5000

Arriel 2D; 1,712.2 hours remaining to TBO; N1 cycles at 52%.

Yes

Yes

Yes

Yes

Garmin G500H EFIS; Garmin GTN; Garmin GTX-345R with ADS-B In/Out; Garmin GRA5500 radar altimeter; Aero Computers UC-6000 17-inch moving map; NAT audio system.

Yes

Yes

Yes

Yes

NVG STC; Onboard Systems 1,400 kg swing cargo hook; left and right cargo mirrors; dual controls; Donaldson inlet barrier filter; IFS air conditioning and cabin heat; wire-strike protection; Dart carbide skid shoes and boarding steps; Kannad 406 ELT; 4-place aft cabin.

Law Enforcement

150-hour/12-month inspection completed July 2026.