0000 - RUTAN DEFIANT

RUTAN

DEFIANT

137

0000

Used

0.0

4

Defiant Project For Sale In Florida 1. Upper and lower fuselage halves moulded, vacuum bagged, and primed (each about 35 lb. lighter than hand laid up parts), bonded together, setting on mains and nosegear, brakes installed, brake pedals installed on both sides, nosegear retracts. Includes gear leg fairings and Atkinson-designed wheel pants. 2. Have moulded, vacuum-bagged strakes (2 uppers and 2 lowers), primed. Includes fuselage fuel sight gauge material from Vance Atkinson. 3. Front seats installed, front and rear consoles installed, folding rear seat constructed and installed per plans. Includes front seat belts. 4. 4 of 5 windows installed in turtledeck (back window on right to open), 3/8” thick fixed windshield. Large gullwing door on left side, door hinges (Lancair IV) and door handles and locking mechanism (Express) installed. Inside of turtledeckpainted white and inside of tub painted blue. 5. Pitch and roll systems and control sticks installed. 6. Engine controls and push-pull cables installed. 7. Belly brake, actuation handle, and actuation mechanism installed. 8. Fuel system tubing, selector valve, and sump tanks (with sump level senders and low fuel warning system) installed, includes Brock Silkscreened valve cover placard. 4 of 5 windows installed in turtledeck (back window on right to open), 3/8” thick fixed windshield. 9. Firewalls and engine mounts installed. 10. 2 Lycoming IO-360B1E injected engines (from early 180 hp Piper Arrows), one of the engines needs to be topped, have log books for both engines. Includes 2 Bendix RSA fuel injection units, 2 starters, 2 ring gears, 2 alternators, 2 dry vacuum pumps, 2 Weldon rotary boost pumps, 2 8” Woofter/Saber propeller extensions and crush plates, 8 dynafocal biscuits, and a Hershey kiss rear spinner. 11. Winglets complete. 12. Right wing shear web installed. Two sets of wing jigs included. 13. All other flying surface foam cut, and jigs fabricated. 14. Electrical wires run (aircraft wire used) and marked, fuse panel installed. 15. All flying surface templates made from 1/16” aluminum plate. 16. All flight light instruments (airspeed marked to Defiant speeds), including Artificial horizon, turn coordinator, directional gyro, dual engine instruments, and 2 Grand Rapids Technologies Engine Information System monitors and all probes, with fuel flow option. Eyebrow lights for “stam” gauges. Bosch motor for elevator trim included. 17. Whelen 3-light strobes, cables, and power supply. 18. All aluminum parts and fittings to finish fabricated. Aluminum tubing to finish included (e.g., canard torque tubes). 18. Most of glass to finish. 19. Lots of micro and flox. 20. Several epoxy kits (Epolite, successor to Safe-T-Poxy, EX-Poxy) as used by Velocity Aircraft 21. Michael Engineering epoxy pump. 22. Roving wetting machine. 22. Defiant original plans #138, engine installation plans, Defiant Owner’s Manual, all Canard Pushers from about CP #7, all Texas Defiant Newsletters, and all Defiant Flyer newsletters through 2006. Price $30,000 Fred I. Mahan (completed Long-EZ N86LE and flew it for 12 years) 625 Lychee Place Merritt Island, FL 32952 Home: 321-452-5797 Cell: 321-266-0164 E-mail: [email protected] Defiant project for sale in Florida

700

1100

SCMOH

SCMOH

Two Lycoming IO-360 B1E 180 hp

In construction