2023 WAUSAU AD

2023

WAUSAU

AD

New

WAUSAU AD–AIRPORT DE-ICING SYSTEMS TRUCK MOUNTED AIRPORT DE-ICER 50, 75, or 100 ft. boom width. 250 gallon-5000 tank capacity. 5-SECTION BOOM SHUT-OFF Booms may be sprayed in fully closed position, partially opened position, or fully opened position. Boom widths of 50’, 75’, or 100’ available. SPRAY BOOM Strongest spray boom in the industry. Constructed of rectangular tubing and equipped with breakaway features for each wing. When in the cradle position, the tips fold back behind the cab door, so no need to walk under dripping chemical when entering and leaving the cab. FEATURES • 4000 Gallons with 75 Ft. Booms; 4000 Gallons with 100 Ft. Booms; 2000 Gallons with 75 Ft. Booms • Tank sizes of 500-5,000 gallons • Safe, low mounted pump station, no crawling between or under booms • Flow-based control system • Stainless steel tanks • 24 – 100′ booms • Truck or trailer mounted • Product pump capacity of 300 or 600 GPM • GPS ground speed sensor OPTIONS • Hose reel – Mechanical or electronically controlled • Flushers available either fixed or remotely controlled from cab THE SPRAY BOOM SPRAY PATTERN / NOZZLE SELECTION SYSTEM No need to remove nozzle when changing from light to heavy application, or when changing from de-icing to anti-icing operations. The unique Tyler “Select a Spray” design allows for complete change over in less than 1 minute. No need to stock additional nozzles, extensions, screens, etc. for various configurations. Stop over-spraying expensive chemicals with the blast button. Apply accurately with the Tyler Ice System. Built-in spring flush check valve. Pull the lever to clear any debris from your check valve. Tyler, ready when you need to go. CONTROL CONSOLE The convenient control console features pre-set application rated. Easy operator control does not require extensive training to operate. The auto start and stop eliminated need to hold “blast”. DRIVER’S SIDE PUMPING STATION Valving and pumping station is conveniently located near the driver’s side door. No need to reach between the spray boom when loading and setting up valving. Each valve handle is color coded for easy understanding of all operations. Load line located low, eliminating potential splashing of materials into the operator’s face during hookup and disconnection. Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.